Packaging protection without lamination

The ebeam Core 100/760 is designed to finish packaging produced on an HP Indigo 20000 printing press and enables packaging protection without lamination.

Technical Specifications

Operating voltage 80 – 100 kV
Max uniform beam width 760 mm
Max production speed 180 m/min
Max rated surface dose rate 5,400 kGy-m/min @ 90-100 kV
(30 kGy @ 180m/min)
Cross-web uniformity ±8%
Web support Patented integrated shield roll
Shield roll drive Several motor and drive options available
Nitrogen inerting level 200 ppm of O2 measured at window
Maximum product thickness including splices 1.25mm
Window design Single window, solid copper with drilled holes and internal cooling passages
High voltage power supply High frequency IGBT switching with integrated spark management control, remote mounted, air cooled, oil filled

The benefits:

Fast time to market

  • Finished products in hours, instead of weeks
  • Instant results that enable immediate slitting and heat sealing
  • High throughput to match finishing line speed
  • Compatibility with multiple coating line suppliers and integrators

Protected and enhanced artwork

  • Decorative freedom (High gloss, matte or a mix of both, Soft-touch, Spot embellishment, Holographic effects)
  • Wide range of substrates (Packaging films, Pre-laminated pouch structures, Mixpap lids)
  • No damage of artwork from heat sealing or adding zippers
  • Supports pasteurization up to 90C°

Sustainable

  • No lamination needed
  • Low energy consumption
  • Little to no heat
  • Small footprint

Food packaging compliant

  • Enable indirect food contact compliance
  • No photoinitiators
  • Several ebeam OPVs available which comply with EU and FDA regulations
  • No odour
Contact us here